60W 12.8V 80Ah municipal solar complementary project street light
Solar photovoltaic panels
300W/36V monocrystalline silicon solar panel (single panel 150 * 2) EVA domestic solar dedicated solar module aluminum frame, waterproof junction box, service life of more than 20 years. Specific parameters are as follows: optimal working voltage 18V, optimal working voltage 16A.
Lithium battery
12.8V 80Ah lithium iron phosphate solar dedicated lithium battery with more than 4000 battery cycles. Aluminum alloy shell design, corrosion-resistant, high capacity. Floating charging voltage 12V, charging current ≤ 20A. The discharge depth can reach 99%, and the service life is over 5 years.
Constant current solar controller
The complementary controller for solar energy in the city, with light control and time control, has protection functions such as overcharge and over discharge, anti reverse connection, anti short circuit, lightning protection, etc. It can set multiple working modes by itself. The service life is over 5 years. The power is adjustable from 10-80W. Equipped with radar sensing distance, the radar sensing distance is ≥ 10m. When a person comes, it will be highlighted for 5 minutes, and when a person leaves, it will be 20%.
Lamp head+light source
The lamp head is dust-proof, waterproof, and corrosion-resistant, with high-efficiency SciClone light beads combined with outdoor dedicated LED lighting fixtures. The heat dissipation effect is good, and the light beads use Purui chips, with a brightness of up to 180-200LM/W and a service life of more than 50000 hours. Specific parameters: efficacy ≥ 0.9, color rendering index>80RA, color temperature 5500K-6000K optional, suitable for temperatures of -10 ° -20 ° C, installation hole ≤ φ 60MM, protection level IP67. When working normally for 10000 hours, the light attenuation is less than 10%. Working voltage 30V, current 2A. Protection level IP65.
Hardware
The solar panel has a height of 6m, an upper diameter of 60mm, a lower diameter of 140mm, and a wall thickness of 2.75mm. It is hot-dip galvanized and coated with paint. The photovoltaic panel and the original lamp post are supported by hardware brackets, and the screws and nuts are made of 304 stainless steel
2.5 National Standard Line
Copper wire
Working mode
Output: The dark light induction automatically controls the light source to turn on and start working, while the light at dawn automatically turns off. Priority is given to using lithium battery storage, and when the battery is not stored, it automatically switches to mains power supply. Radar microwave induction (induction distance ≥ 10m) adjusts the power of the lamps, detects vehicles and personnel running at full power for 5 minutes, and after 5 minutes, the automatic power drops to 20%.
Continuous working days
Lighting for 12 hours a day, continuous 5-10 rainy days
Applicable temperature range
-30℃~+75℃
Installation inclination angle
34.2 degrees
Reference solar irradiance
three point eight
The delivery time depends on the quantity of the order
Quality assurance: The entire lamp comes with a 3-year battery warranty and a 5-year warranty from the date of manufacture
